#!/bin/sh
## kickstart shell script
## Dan Barber  Aug 27, 2009

KICKSTART=kickstart.conf
PKGLIST=pkglist.txt
MOUNT=/var/log/mount
TARGET=/mnt
TMP=/var/log/setup/tmp

if [ ! -d $TMP ]; then
 mkdir -p $TMP
fi

for CMDELEM in $(cat /proc/cmdline) ; do
 if $(echo $CMDELEM | grep -q "^cf=") ; then
  CF_OPTIONS=$(echo $CMDELEM | cut -f2 -d=)
  PROTO=$(echo $CF_OPTIONS | cut -f1 -d,)
  DLSERVER=$(echo $CF_OPTIONS | cut -f2 -d,)
  KICKSTART=$(echo $CF_OPTIONS | cut -f3 -d,)
  PKGLIST=$(echo $CF_OPTIONS | cut -f4 -d,)
 fi
done

for CMDELEM in $(cat /proc/cmdline) ; do
 if $(echo $CMDELEM | grep -q "^nic=") ; then
  NIC_OPTIONS=$(echo $CMDELEM | cut -f2 -d=)
  INTERFACE=$(echo $NIC_OPTIONS | cut -f2 -d:)
  ENET_MODE=$(echo $NIC_OPTIONS | cut -f3 -d:)
  if [ "$ENET_MODE" = "static" ]; then
   IPADDR=$(echo $NIC_OPTIONS | cut -f4 -d:)
   NETMASK=$(echo $NIC_OPTIONS | cut -f5 -d:)
   # We allow for CIDR notation of the netmask (0 < NETMASK < 25):
   if [ "$(echo $NETMASK | tr -cd '\.')" != "..." ]; then
    NETMASK=$(cidr_cvt $NETMASK)
   fi
   GATEWAY=$(echo $NIC_OPTIONS | cut -f6 -d:)
  fi
  MODULES=$(echo $NIC_OPTIONS | cut -f1 -d:)
  break
 fi
done
	
if [ -n "$MODULES" ]; then
 for i in $MODULES; do modprobe $i 1>/dev/null 2>/dev/null ; done
 if [ "$ENET_MODE" = "dhcp" ]; then
  dhcpcd $INTERFACE
 else
	ifconfig $INTERFACE IPADDR netmask $NETMASK
	route add default gw $GATEWAY
 fi
fi

if [ -n "$CF_OPTIONS" ]; then
 if [ "$PROTO" = "tftp" ]; then
  tftp -g -r $KICKSTART -l $TMP/$KICKSTART $DLSERVER 1>/dev/null 2>&1
  tftp -g -r $PKGLIST -l $TMP/$PKGLIST $DLSERVER 
 elif [ "$PROTO" = "ftp" -o "$PROTO" = "http" ]; then
  wget -q -P $TMP -O $KICKSTART ${PROTO}://${DLSERVER}${KICKSTART}
  wget -q -P $TMP -O $PKGLIST ${PROTO}://${DLSERVER}${PKGLIST}
 fi
fi

if [ -f $TMP/$KICKSTART ]; then
 eval $(grep "^MODULES=" $TMP/$KICKSTART)
 eval $(grep "^ENET_DEVICE=" $TMP/$KICKSTART)
 eval $(grep "^ENET_MODE=" $TMP/$KICKSTART)
 eval $(grep "^LOCAL_IPADDR=" $TMP/$KICKSTART)
 eval $(grep "^LOCAL_NETMASK=" $TMP/$KICKSTART)
 eval $(grep "^LOCAL_BROADCAST=" $TMP/$KICKSTART)
 eval $(grep "^LOCAL_GATEWAY=" $TMP/$KICKSTART)
 eval $(grep "^LOCAL_NAMESERVERS=" $TMP/$KICKSTART)
 eval $(grep "^SSH_SERVER=" $TMP/$KICKSTART)
 eval $(grep "^NET_SOURCE=" $TMP/$KICKSTART)
 eval $(grep "^REMOTE_IPADDR=" $TMP/$KICKSTART)
 eval $(grep "^REMOTE_PATH=" $TMP/$KICKSTART)
 eval $(grep "^REMOTE_SHARE=" $TMP/$KICKSTART)
 eval $(grep "^REMOTE_URL=" $TMP/$KICKSTART)
 eval $(grep "^PARTITION_DEVICE=" $TMP/$KICKSTART)
 eval $(grep "^DEVICE=" $TMP/$KICKSTART)
 eval $(grep "^PART1=" $TMP/$KICKSTART)
 eval $(grep "^PART2=" $TMP/$KICKSTART)
 eval $(grep "^PART3=" $TMP/$KICKSTART)
 eval $(grep "^PART4=" $TMP/$KICKSTART)
 eval $(grep "^PACKAGES=" $TMP/$KICKSTART)
 eval $(grep "^DISKSETS=" $TMP/$KICKSTART)
 eval $(grep "^EXCLUDE_DISKSETS=" $TMP/$KICKSTART)
 eval $(grep "^ROOT_PW=" $TMP/$KICKSTART)
 eval $(grep "^HOSTNAME=" $TMP/$KICKSTART)
 eval $(grep "^DOMAIN=" $TMP/$KICKSTART)
 eval $(grep "^KEYMAP=" $TMP/$KICKSTART)
 eval $(grep "^TZ=" $TMP/$KICKSTART)
 eval $(grep "^HWCLOCK=" $TMP/$KICKSTART)
fi


for i in $MODULES; do modprobe $i 1>/dev/null 2>/dev/null ; done

if [ "$SSH_SERVER" = "yes" ]; then
 if [ -x /etc/rc.d/rc.dropbear ]; then
  /etc/rc.d/rc.dropbear start
 fi
fi

## Discover partition information
PART1_DEV=`echo $PART1 | awk -F, '{print $1}'`
PART1_MNT=`echo $PART1 | awk -F, '{print $2}'`
PART1_FS=`echo $PART1 | awk -F, '{print $3}'`
PART1_START=`echo $PART1 | awk -F, '{print $4}'`
PART1_END=`echo $PART1 | awk -F, '{print $5}'`
PART1_FORMAT=`echo $PART1 | awk -F, '{print $6}'`
##-----
PART2_DEV=`echo $PART2 | awk -F, '{print $1}'`
PART2_MNT=`echo $PART2 | awk -F, '{print $2}'`
PART2_FS=`echo $PART2 | awk -F, '{print $3}'`
PART2_START=`echo $PART2 | awk -F, '{print $4}'`
PART2_END=`echo $PART2 | awk -F, '{print $5}'`
PART2_FORMAT=`echo $PART2 | awk -F, '{print $6}'`
##-----
PART3_DEV=`echo $PART3 | awk -F, '{print $1}'`
PART3_MNT=`echo $PART3 | awk -F, '{print $2}'`
PART3_FS=`echo $PART3 | awk -F, '{print $3}'`
PART3_START=`echo $PART3 | awk -F, '{print $4}'`
PART3_END=`echo $PART3 | awk -F, '{print $5}'`
PART3_FORMAT=`echo $PART3 | awk -F, '{print $6}'`
##-----
PART4_DEV=`echo $PART4 | awk -F, '{print $1}'`
PART4_MNT=`echo $PART4 | awk -F, '{print $2}'`
PART4_FS=`echo $PART4 | awk -F, '{print $3}'`
PART4_START=`echo $PART4 | awk -F, '{print $4}'`
PART4_END=`echo $PART4 | awk -F, '{print $5}'`
PART4_FORMAT=`echo $PART4 | awk -F, '{print $6}'`

## Partition Device
if [ "$PARTITION_DEVICE" = "yes" ]; then
 #START=0
 #END=`parted $DEVICE print | grep Disk | awk -F: '{print $2}'`
  for i in 1 2 3 4; do
   parted -s $DEVICE rm $i 1>/dev/null 2>/dev/null
  done
 sleep 1
 if [ -n "$PART1_END" ]; then
   parted -s $DEVICE mkpart primary $PART1_START $PART1_END
 fi
 if [ -n "$PART2_END" ]; then
   parted -s $DEVICE mkpart primary $PART2_START $PART2_END
 fi
 if [ -n "$PART3_END" ]; then
   parted -s $DEVICE mkpart primary $PART3_START $PART3_END
 fi
 if [ -n "$PART4_END" ]; then
   parted -s $DEVICE mkpart primary $PART4_START $PART4_END
 fi
fi

if [ "$PART1_FORMAT" = "format" ]; then
  MOUNTED=`df | grep $PART1_DEV`
  if [ "$MOUNTED" != "" ];then
   umount $PART1_DEV
  fi
   if [ "$PART1_FS" = "ext2" ]; then
    mkfs.ext2 $PART1_DEV
   fi
   if [ "$PART1_FS" = "ext3" ]; then
    mkfs.ext2 -j $PART1_DEV
   fi
   if [ "$PART1_FS" = "jfs" ]; then
    mkfs.jfs -q $PART1_DEV
   fi
   if [ "$PART1_FS" = "xfs" ]; then
    mkfs.xfs -f $PART1_DEV
   fi
fi

if [ "$PART2_FORMAT" = "format" ]; then
  MOUNTED=`df | grep $PART2_DEV`
  if [ "$MOUNTED" != "" ];then
   umount $PART2_DEV
  fi
   if [ "$PART2_FS" = "ext2" ]; then
    mkfs.ext2 $PART2_DEV
   fi
   if [ "$PART2_FS" = "ext3" ]; then
    mkfs.ext2 -j $PART2_DEV
   fi
   if [ "$PART2_FS" = "jfs" ]; then
    mkfs.jfs -q $PART2_DEV
   fi
   if [ "$PART2_FS" = "xfs" ]; then
    mkfs.xfs -f $PART2_DEV
   fi
fi

if [ "$PART3_FORMAT" = "format" ]; then
  MOUNTED=`df | grep $PART3_DEV`
  if [ "$MOUNTED" != "" ];then
   umount $PART3_DEV
  fi
   if [ "$PART3_FS" = "ext2" ]; then
    mkfs.ext2 $PART3_DEV
   fi
   if [ "$PART3_FS" = "ext3" ]; then
    mkfs.ext2 -j $PART3_DEV
   fi
   if [ "$PART3_FS" = "jfs" ]; then
    mkfs.jfs -q $PART3_DEV
   fi
   if [ "$PART3_FS" = "xfs" ]; then
    mkfs.xfs -f $PART3_DEV
   fi
fi

if [ "$PART4_FORMAT" = "format" ]; then
  MOUNTED=`df | grep $PART4_DEV`
  if [ "$MOUNTED" != "" ];then
   umount $PART4_DEV
  fi
   if [ "$PART4_FS" = "ext2" ]; then
    mkfs.ext2 $PART4_DEV
   fi
   if [ "$PART4_FS" = "ext3" ]; then
    mkfs.ext2 -j $PART4_DEV
   fi
   if [ "$PART4_FS" = "jfs" ]; then
    mkfs.jfs -q $PART4_DEV
   fi
   if [ "$PART4_FS" = "xfs" ]; then
    mkfs.xfs -f $PART4_DEV
   fi
fi

MOUNTED=`df | grep $PART1_DEV`
if [ "$MOUNTED" = "" ];then
  mount -t$PART1_FS $PART1_DEV /mnt
fi

MOUNTED=`df | grep $PART2_DEV`
if [ "$MOUNTED" = "" ];then
	if [ ! -e /mnt$PART2_MNT ]; then
    mkdir /mnt$PART2_MNT
  fi
  mount -t$PART2_FS $PART2_DEV /mnt$PART2_MNT
fi

MOUNTED=`df | grep $PART3_DEV`
if [ "$MOUNTED" = "" ];then
	if [ ! -e /mnt$PART3_MNT ]; then
    mkdir /mnt$PART3_MNT
  fi
  mount -t$PART3_FS $PART3_DEV /mnt$PART3_MNT
fi

MOUNTED=`df | grep $PART4_DEV`
if [ "$MOUNTED" = "" ];then
	if [ ! -e /mnt$PART4_MNT ]; then
    mkdir /mnt$PART4_MNT
  fi
  mount -t$PART4_FS $PART4_DEV /mnt$PART4_MNT
fi


if [ "$NET_SOURCE" = "NFS" ]; then
 mount -r -t nfs -o nolock $REMOTE_IPADDR:$REMOTE_PATH $MOUNT
elif [ "$NET_SOURCE" = "SMB" ]; then
 mount -t cifs -o ro,guest,sec=none $REMOTE_SHARE $MOUNT
elif [ "$NET_SOURCE" = "FTP" ] || [ "$NET_SOURCE" = "HTTP" ]; then
 echo "FTP and HTTP installs are not yet supported in kickstart."
else 
 echo "$NET_SOURCE is not a valid option."
fi


if [ "$PACKAGES" = "diskset" ];then
 if [ "$DISKSETS" != "" ]; then
  if  [ "$DISKSETS" = "ALL" ]; then
    DISKSETS="a ap d e f k kde kdei l n t tcl x xap y"
  fi
  for i in $EXCLUDE_DISKSETS; do DISKSETS=`echo $DISKSETS | sed "s/$i //g"`; done
  for i in $DISKSETS; do installpkg -root $TARGET -infobox $MOUNT/$i/*tgz; done
 fi
fi

if [ "$PACKAGES" = "pkglist" ];then
   for i in `cat $TMP/pkglist.txt | grep -v "^#"`; do installpkg -root $TARGET -infobox $MOUNT/$i*tgz; done
fi

if [ "$PACKAGES" = "both" ];then
 if [ "$DISKSETS" != "" ]; then
  for i in $DISKSETS; do installpkg -root $TARGET -infobox $MOUNT/$i/*tgz; done
  for i in `cat $TMP/pkglist.txt`; do installpkg -root $TARGET -infobox $MOUNT/$i*tgz; done
 fi
fi

## FSTAB
cat /dev/null > $TARGET/etc/fstab
printf "%-16s %-16s %-11s %-16s %-3s %s\n" "$PART1_DEV" "/" "$PART1_FS" "defaults" "1" "1" >> $TARGET/etc/fstab
if [ -n "$PART2_END" ];then 
printf "%-16s %-16s %-11s %-16s %-3s %s\n" "$PART2_DEV" "$PART2_MNT" "$PART2_FS" "defaults" "1" "1" >> $TARGET/etc/fstab
fi
if [ -n "$PART3_END" ];then 
printf "%-16s %-16s %-11s %-16s %-3s %s\n" "$PART3_DEV" "$PART3_MNT" "$PART3_FS" "defaults" "1" "1" >> $TARGET/etc/fstab
fi
if [ -n "$PART4_END" ];then 
printf "%-16s %-16s %-11s %-16s %-3s %s\n" "$PART4_DEV" "$PART4_MNT" "$PART4_FS" "defaults" "1" "1" >> $TARGET/etc/fstab
fi
printf "%-16s %-16s %-11s %-16s %-3s %s\n" "#/dev/cdrom" "/mnt/cdrom" "auto" "noauto,owner,ro" "0" "0" >> $TARGET/etc/fstab
printf "%-16s %-16s %-11s %-16s %-3s %s\n" "/dev/fd0" "/mnt/floppy" "auto" "noauto,owner" "0" "0" >> $TARGET/etc/fstab
printf "%-16s %-16s %-11s %-16s %-3s %s\n" "devpts" "/dev/pts" "devpts" "gid=5,mode=620" "0" "0" >> $TARGET/etc/fstab
printf "%-16s %-16s %-11s %-16s %-3s %s\n" "proc" "/proc" "proc" "defaults" "0" "0" >> $TARGET/etc/fstab
printf "%-16s %-16s %-11s %-16s %-3s %s\n" "tmpfs" "/dev/shm" "tmpfs" "defaults" "0" "0" >> $TARGET/etc/fstab
printf "%-16s %-16s %-11s %-16s %-3s %s\n" "tmpfs" "/tmp" "tmpfs" "defaults" "0" "0" >> $TARGET/etc/fstab
printf "%-16s %-16s %-11s %-16s %-3s %s\n" "tmpfs" "/jidtmp" "tmpfs" "defaults" "0" "0" >> $TARGET/etc/fstab

## Set Root Passwd
sed "/^root:/d" $TARGET/etc/shadow > $TMP/tmp_shadow
echo "root:$ROOT_PW:14348:0:::::" > $TARGET/etc/shadow
cat $TMP/tmp_shadow >> $TARGET/etc/shadow
rm $TMP/tmp_shadow

## Set Hostname
if [ "$HOSTNAME" != "" ]; then
echo $HOSTNAME.$DOMAIN > $TARGET/etc/HOSTNAME
sed -i -e "s/example.net/$DOMAIN/g" -e "s/darkstar/$HOSTNAME/g" $TARGET/etc/hosts
fi

## Set Keymap
if [ "$KEYMAP" != "" ]; then
	tar xzOf /etc/keymaps.tar.gz $KEYMAP.bmap | loadkmap
  echo "#!/bin/sh" > $TARGET/etc/rc.d/rc.keymap
  echo "# Load the keyboard map.  More maps are in /usr/share/kbd/keymaps." \
  >> $TARGET/etc/rc.d/rc.keymap
  echo "if [ -x /usr/bin/loadkeys ]; then" >> $TARGET/etc/rc.d/rc.keymap
  echo " /usr/bin/loadkeys $KEYMAP" >> $TARGET/etc/rc.d/rc.keymap
  echo "fi" >> $TARGET/etc/rc.d/rc.keymap
  chmod 755 $TARGET/etc/rc.d/rc.keymap
fi

if [ "$TZ" != "" ]; then
   cd $TARGET/etc
   if [ -r $TARGET/usr/share/zoneinfo/$TZ -o \
        -r /var/log/mount/usr/share/zoneinfo/$TZ -o \
        -L $TARGET/usr/share/zoneinfo/$TZ -o \
        -L /var/log/mount/usr/share/zoneinfo/$TZ ]; then
      ln -sf /usr/share/zoneinfo/$TZ localtime-copied-from
      rm -f localtime
      cd ..
      chroot . cp etc/localtime-copied-from etc/localtime
   fi
fi

if [ "$HWCLOCK" != "" ]; then
  echo "# /etc/hardwareclock" > $TARGET/etc/hardwareclock
  echo "#" >> $TARGET/etc/hardwareclock
  echo "# Tells how the hardware clock time is stored." >> $TARGET/etc/hardwareclock
  echo "# You should run timeconfig to edit this file." >> $TARGET/etc/hardwareclock
  echo >> $TARGET/etc/hardwareclock
  echo $HWCLOCK >> $TARGET/etc/hardwareclock
fi



## Configure /etc/rc.d/rc.inet1.conf
if [ "$ENET_MODE" = "dhcp" ]; then
 USE_DHCP=yes
 LOCAL_IPADDR=""
 LOCAL_NETMASK=""
 LOCAL_GATEWAY=""
fi
cat << EOF > $TARGET/etc/rc.d/rc.inet1.conf
# /etc/rc.d/rc.inet1.conf
#
# This file contains the configuration settings for network interfaces.
# If USE_DHCP[interface] is set to "yes", this overrides any other settings.
# If you don't have an interface, leave the settings null ("").

# You can configure network interfaces other than eth0,eth1... by setting
# IFNAME[interface] to the interface's name. If IFNAME[interface] is unset
# or empty, it is assumed you're configuring eth<interface>.

# Several other parameters are available, the end of this file contains a
# comprehensive set of examples.

# =============================================================================

# Config information for eth0:
IPADDR[0]="$LOCAL_IPADDR"
NETMASK[0]="$LOCAL_NETMASK"
USE_DHCP[0]="$USE_DHCP"
DHCP_HOSTNAME[0]=""

# Config information for eth1:
IPADDR[1]=""
NETMASK[1]=""
USE_DHCP[1]=""
DHCP_HOSTNAME[1]=""

# Config information for eth2:
IPADDR[2]=""
NETMASK[2]=""
USE_DHCP[2]=""
DHCP_HOSTNAME[2]=""

# Config information for eth3:
IPADDR[3]=""
NETMASK[3]=""
USE_DHCP[3]=""
DHCP_HOSTNAME[3]=""

# Default gateway IP address:
GATEWAY="$LOCAL_GATEWAY"

# Change this to "yes" for debugging output to stdout.  Unfortunately,
# /sbin/hotplug seems to disable stdout so you'll only see debugging output
# when rc.inet1 is called directly.
DEBUG_ETH_UP="no"

## Example config information for wlan0.  Uncomment the lines you need and fill
## in your info.  (You may not need all of these for your wireless network)
#IFNAME[4]="wlan0"
#IPADDR[4]=""
#NETMASK[4]=""
#USE_DHCP[4]="yes"
#DHCP_HOSTNAME[4]="icculus-wireless"
#DHCP_KEEPRESOLV[4]="yes"
#DHCP_KEEPNTP[4]="yes"
#DHCP_KEEPGW[4]="yes"
#DHCP_IPADDR[4]=""
#WLAN_ESSID[4]=BARRIER05
#WLAN_MODE[4]=Managed
##WLAN_RATE[4]="54M auto"
##WLAN_CHANNEL[4]="auto"
##WLAN_KEY[4]="D5AD1F04ACF048EC2D0B1C80C7"
##WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=96389dc66eaf7e6efd5b5523ae43c7925ff4df2f8b7099495192d44a774fda16"
#WLAN_WPA[4]="wpa_supplicant"
#WLAN_WPADRIVER[4]="ndiswrapper"

## Some examples of additional network parameters that you can use.
## Config information for wlan0:
#IFNAME[4]="wlan0"              # Use a different interface name nstead of
                                # the default 'eth4'
#HWADDR[4]="00:01:23:45:67:89"  # Overrule the card's hardware MAC address
#MTU[4]=""                      # The default MTU is 1500, but you might need
                                # 1360 when you use NAT'ed IPSec traffic.
#DHCP_KEEPRESOLV[4]="yes"       # If you dont want /etc/resolv.conf overwritten
#DHCP_KEEPNTP[4]="yes"          # If you don't want ntp.conf overwritten
#DHCP_KEEPGW[4]="yes"           # If you don't want the DHCP server to change
                                # your default gateway
#DHCP_IPADDR[4]=""              # Request a specific IP address from the DHCP
                                # server
#WLAN_ESSID[4]=DARKSTAR         # Here, you can override _any_ parameter
                                # defined in rc.wireless.conf, by prepending
                                # 'WLAN_' to the parameter's name. Useful for
                                # those with multiple wireless interfaces.
#WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=thekey"
                                # Some drivers require a private ioctl to be
                                # set through the iwpriv command. If more than
                                # one is required, you can place them in the
                                # IWPRIV parameter (separated with the pipe (|)
                                # character, see the example).
EOF

## configure nameserver
echo "search $DOMAIN" > $TARGET/etc/resolv.conf
for i in $LOCAL_NAMESERVERS; do
echo "nameserver $i" >> $TARGET/etc/resolv.conf
done
	

## Clean up any permission problems
if [ -d $TARGET/usr/src/linux ]; then
  chmod 755 $TARGET/usr/src/linux
fi
if [ ! -d $TARGET/proc ]; then
  mkdir $TARGET/proc
  chown root.root $TARGET/proc
fi
if [ ! -d $TARGET/sys ]; then
  mkdir $TARGET/sys
  chown root.root $TARGET/sys
fi
chmod 1777 $TARGET/tmp
if [ ! -d $TARGET/var/spool/mail ]; then
  mkdir -p $TARGET/var/spool/mail
  chmod 755 $TARGET/var/spool
  chown root.mail $TARGET/var/spool/mail
  chmod 1777 $TARGET/var/spool/mail
fi

## Run the final configs.  Not hands free here.
cat << EOF > $TARGET/etc/lilo.conf
# LILO configuration file
# generated by 'liloconfig'
#
# Start LILO global section
# Append any additional kernel parameters:
append=" vt.default_utf8=0"
boot = $DEVICE

# Boot BMP Image.
# Bitmap in BMP format: 640x480x8
  bitmap = /boot/slack.bmp
# Menu colors (foreground, background, shadow, highlighted
# foreground, highlighted background, highlighted shadow):
  bmp-colors = 255,0,255,0,255,0
# Location of the option table: location x, location y, number of
# columns, lines per column (max 15), "spill" (this is how many
# entries must be in the first column before the next begins to
# be used.  We don't specify it here, as there's just one column.
  bmp-table = 60,6,1,16
# Timer location x, timer location y, foreground color,
# background color, shadow color.
  bmp-timer = 65,27,0,255

# Standard menu.
# Or, you can comment out the bitmap menu above and 
# use a boot message with the standard menu:
#message = /boot/boot_message.txt

# Wait until the timeout to boot (if commented out, boot the
# first entry immediately):
prompt
# Timeout before the first entry boots.
# This is given in tenths of a second, so 600 for every minute:
timeout = 1200
# Override dangerous defaults that rewrite the partition table:
change-rules
  reset
# VESA framebuffer console @ 1024x768x256
vga = 791
# Normal VGA console
# vga = normal
# VESA framebuffer console @ 1024x768x64k
# vga=791
# VESA framebuffer console @ 1024x768x32k
# vga=790
# VESA framebuffer console @ 1024x768x256
# vga=773
# VESA framebuffer console @ 800x600x64k
# vga=788
# VESA framebuffer console @ 800x600x32k
# vga=787
# VESA framebuffer console @ 800x600x256
# vga=771
# VESA framebuffer console @ 640x480x64k
# vga=785
# VESA framebuffer console @ 640x480x32k
# vga=784
# VESA framebuffer console @ 640x480x256
# vga=769
# End LILO global section
# Linux bootable partition config begins
image = /boot/vmlinuz
  root = $PART1_DEV 
  label = Linux
  read-only
# Linux bootable partition config ends
EOF

lilo -C $TARGET/etc/lilo.conf -b $DEVICE


## Run a couple scripts to config X if installed
if [ -n "`echo $DISKSETS | grep \"x \"`" ];then
	echo "sourcing X setup scripts."
	cd $TARGET
	for i in var/log/setup/setup.0[0-6]*
    do
	    ( COLOR=on ; cd $TARGET ; . $i / $PART1_DEV ) 
    done
  cd -
fi

## Run a couple scripts to config KDE if installed
if [ -n "`echo $DISKSETS | grep \"kde \"`" ];then
	echo "sourcing X setup scripts."
	cd $TARGET
	for i in var/log/setup/setup.0[7-9]*
    do
	    ( COLOR=on ; cd $TARGET ; . $i / $PART1_DEV ) 
    done
  cd -
fi

## All done. Let the user know.
cat << EOF > /etc/motd

Your Slackware Network Auto Install is complete.

Reboot. Ensure that your system is not configured
to boot automatically from LAN, unless you want to
reinstall.

EOF

dialog --title "Slackware Auto Install Complete" --cr-wrap --infobox \
"Your Slackware Network Auto Install is complete.\n\
\n\
Reboot. Ensure that your system is not configured \
to boot automatically from LAN, unless you want to \
reinstall. \n" 13 60